Support articles

Find clear, step-by-step solutions to common WithSecure issues across installation, configuration, updates, and product performance.

Client Security goes into "Network isolation" state by itself

Issue:

One or more Client Security hosts have gone into a "Network isolation" state and are unable to connect to the internet. What can cause Client Security to automatically isolate device from the network?

Resolution:

If Client Security devices have been automatically isolated from the network by Client Security, It is likely that the network quarantine feature has been enabled in the policy settings for the device. The network quarantine setting can automatically Client Security devices from the network due to outdated virus definition on the managed hosts or if real-time scanning has been disabled on the host. 

To check the network isolation settings in the policy:

  1. Log in to the Policy Manager Console
  2. Select a host or policy domain from the domain tree
  3. Go to the Settings tab
  4. Navigate to the Windows > Firewall settings page
  5. Scroll down to the Network quarantine section
  6. Check if the network quarantine feature is enabled

If network quarantine is enabled, the Virus definition age to activate network quarantine value determines how old the definitions can be before the Client Security host is automatically isolated from the network.

The network quarantine section also includes the setting for "Activate network quarantine on host if real-time scanning is disabled". 

You can release a host from network isolation by following these steps:

NOTE: The operation cannot be performed on domain level or when multiple hosts are selected

 

  1. Log in to Policy Manager console
  2. Select the host under Domain tree
  3. Click on the Operations tab at the top menu
  4. Under Network isolation, click the 'Release' option