Support articles

Find clear, step-by-step solutions to common WithSecure issues across installation, configuration, updates, and product performance.

Configuring different scan schedule at scan target level instead of scan group in Elements Exposure Management

Issue:

If I have an Elements Exposure Management network scan group with a scan schedule configured. Can we use different scan schedule for specific scan targets within the scan group? 

Resolution:

To configure different scan schedule at the scan target level instead of scan group:

  1. Log in to the Elements Security Center portal
  2. Navigate to the Security configurations > Scans page
  3. Open the Network scans tab,
  4. Expand a scan group.
  5. Locate the scan target, click the three dots on the right side of the scan target
  6. Select Edit scan settings
  7. Click Next until the Other settings page
  8. Eble Schedule for the scan target
  9. Configure the new schedule or use the pre-configured system scan template
  10. Click Finish to save.

Note: We cannot skip the scheduling, but you may turn off the Run indefinitely option and set the Number of times to scan to 1.