Support articles

Find clear, step-by-step solutions to common WithSecure issues across installation, configuration, updates, and product performance.

The device appears in both the Devices and Unmanaged Devices lists in the Elements portal

Issue:

Why does a device still appear in the Elements Security Center portal's Unmanaged devices list even after the Elements Agent has been installed on a device?

Resolution:

If you have removed and reinstalled the Elements Agent, you need to verify whether the device UUIDs remain the same. The Elements backend treats any device with a different UUID as a new device.

If the UUIDs are unchanged, you will need to perform a new unmanaged devices scan. Once completed, you can use the “Latest AD Scan Results” view to filter and display only the devices detected in the most recent scan. This ensures that devices where the agent was previously installed but are no longer found in scans will not appear in the list.

Note: Devices from previous AD scans are not automatically removed from the Unmanaged devices list. This is the reason you need to use the Last AD Scan Results view if you want to see only the devices which were found during the last AD scan. 

To perform an Unmanaged devices scan,

  1. Log in to the Elements Security Center portal
  2. Navigate to the Environment > Devices page
  3. Open the Unmanaged devices tab
  4. Click on the three dots and select Unmanaged devices scan
  5. Select a device to use for the unmanaged devices scan and if needed, can also activate daily scans.