Support articles

Find clear, step-by-step solutions to common WithSecure issues across installation, configuration, updates, and product performance.

A Windows's application's outbound connection is blocked by Elements Endpoint Protection firewall profile

Issue:

After installing Elements Endpoint Protection Agent on a Windows computer, a software's or application's internet connectivity is blocked. 

Resolution:

When Elements Endpoint Protection Agent (Elements EPP for Computers) is installed on a Windows computer, the WithSecure firewall profile sets the Windows Defender firewall's default outbound action as: "Outbound connections that do not match a rule are blocked".

This means that if an application's internet connectivity is blocked after installing Elements Endpoint Protection Agent, you need to manually create an outbound firewall rule which allows the application to connect to internet. 

To create a firewall rule using the Elements profile editor:

  1. Log in to the Elements Security Center portal
  2. Navigate to the Security configurations > Profiles page
  3. Open the profile that is in use on your devices
    1. Note: Default WithSecure profiles cannot be modified. You need to create a new profile and assign it to your devices if you wish to create custom rules
  4. Go to the Firewall settings page
  5. Expand the Normal workstation firewall profile
  6. Click Add rule
  7. Set action as Allow and direction as Out
  8. Enter to required protocols, IP addresses and ports in the Attributes column
    1. Note: You need to check from the application's user guide which ports and protocols it uses
  9. Click Save profile

If you do not wish to create custom firewall rules, alternatively you can either set the Allow unknown outbound connections setting as Enabled or you can disable the use of WithSecure firewall profiles completely by selecting from the WithSecure firewall mode drop-down menu the Do nothing option and then save the profile.