-
How to display encrypted messages in Messaging Security Gateway End User Web
Read more
Issue:
How to allow users to be able to see and manage the encrypted messages they have sent through Messaging Security Gateway using the end user web service?
Resolution:
To enable management of sent encrypted messages in the end user web service (euweb):
- Log into the Messaging Security Gateway Web UI.
- Click on the System tab.
- From the left-side menu, navigate to End User Services > Web Application.
- Under Settings, change Show Encryption Key Management to On.
- Click Save Changes at the top left corner.
-
How to manually download software updates using WithSecure Policy Manager?
Read more
Issue:
WithSecure Policy Manager informs on the Software updates tab that a update package is required to be downloaded manually, how does this work in Software Updater?
Resolution:
F-Secure Policy Manager 14.30 or later now allows manually downloading software updates that cannot be downloaded automatically from vendors' sites, e.g. Oracle Java updates.
Hosts report such updates as requiring manual downloading and the admin is able to download and import those using the Manual downloads feature found on the Software updates tab in Policy Manager Console.
-
How to manage (start/stop/restart/check status) services of Linux Security 64?
Read more
Issue:
How to manage (start/stop/restart/check status) services of Linux Security 64?
Resolution:
You can check the status, start and stop the services of Linux Security 64 by running the following commands in terminal.Command to check the status of services:
# /opt/f-secure/fsbg/bin/master-switch statusCommand to start services:
# /opt/f-secure/fsbg/bin/master-switch onCommand to stop services:
# /opt/f-secure/fsbg/bin/master-switch off"Restart" is not available as an option, thus you will need to run the commands in the following sequence in order to restart the services of F-Secure Linux Security 64.
# /opt/f-secure/fsbg/bin/master-switch off
# /opt/f-secure/fsbg/bin/master-switch on -
How to configure alert forwarding by email on Policy Manager?
Read more
Issue:
How can I configure alert forwarding by email on Policy Manager?
Resolution:
You can set Policy Manager to send alerts for the managed environment to one or more recipients by email.
You can send alerts both for Policy Manager Server notifications and for managed hosts. Policy Manager Server alerts are each sent as individual emails, but multiple host alerts can be included in the same email. Policy Manager checks for new alerts that are received from managed hosts every ten minutes.
Follow the steps below to configure email forwarding for alerts:
- Select Tools > Server configuration from the menu
- Click Email alerts
- Enter the email addresses for the recipients
- All recipients will receive all of the alerts generated by the system
- Select either Host and server alerts or Server alerts only as the alert type to send by email
- If you include host alerts, set the minimum alert severity and how many alerts you want to see in individual emails
-
Note: If the number of alerts for the polling period exceeds the selected amount, the email shows you the most recent alerts and prompts you to check the remaining alerts in the Policy Manager Console.
-
- Click OK.
-
How to reduce CPU usage during WithSecure Client Security or Server Security scheduled scanning?
Read more
Issue:
WithSecure Client Security or Server Security scheduled scan causes high CPU usage. How can I reduce this?
Resolution:
Follow the steps below to change the priority of the scan from "Normal" to "Background" to improve the host performance during scheduled scanning:
- Open the Policy Manager console
- Select a host or policy domain from the domain tree
- Go to the Settings tab
- Navigate to Windows > Manual scanning
- In the Scheduled scanning section you can change these settings to improve performance:
- Run scanning with low priority (scan takes longer but takes less CPU resources)
- Scan only known file types (scan in faster but does not scan all files)
- Scan inside compressed archives (this requires significantly more CPU resources)
- After changing settings, distribute the policy (Ctrl + D)
-
How to create a targeted scheduled scan in Policy Manager for Client Security clients?
Read more
Issue:
How to create a targeted scheduled scan in Policy Manager for WithSecure Client Security and Server Security clients?
Resolution:
You can create a targeted scheduled scan by following these steps:
- Log in to Policy Manager Console
- Select the host or domain from the Domain Tree
- Go to the Settings tab
- Go to the Windows > Manual scanning page
- Click Add on the right side of the Scheduled scanning list
- Enter the Scheduling parameters (Example: /t08:30 /rweekly /s4 - this scan will be run each Thursday at 08:30)
- Select Generic as the Task Type
- Enter in the Task Type Specific Parameters:
- Client Security:"C:\Program Files (x86)\F-Secure\Client Security\fsscan.exe" -s C:\Examplefolder
- Server Security: "C:\Program Files (x86)\F-Secure\Server Security\fsscan.exe" -s D:\Examplefolder
- Distribute the policy
This will scan the target folder C:\Examplefolder and sub-folders within it with the current scan settings shown in Policy Manager Console in the File scanning section on the Manual scanning page.
Fsscan.exe does not support several target folders. You will need to create a separate scheduled scan for each target. Several targeted scans can run concurrently.
-
How to increase the logging level of a Client Security or Server Security host via WithSecure Policy Manager Console
Read more
Issue:
How to increase the logging level (enable debug logging) of a Client Security or Server Security host via Policy Manager Console?
Resolution:
Note: These steps require Policy Manager Console 15.10 or later.
You can increase the logging level via the following setting in the Policy Manager Console:
- Log in to the Policy Manager Console
- Select a host or policy domain from the domain tree
- Go to the Settings tab (standard view)
- Go to the Centralized management settings page
- In the Logging section, change the Client logging level to Debug
Doing this will enable the following on the Windows endpoint client:
- Full debug logging in the product logs.
- Collect the API tracing log (fssua.opswat_api.log) and debug log (C:\Program Files (x86)\F-Secure\Client Security\swup\v4DebugInfo*.log) for the Software Updater feature.
After enabling debug logging, reproducing the issue and collecting the logs by running the Support Tool, you should lower the logging level by switching the client logging level back to "Info" and distribute the policy. When debug logging is enabled, the product will use more resources.
-
How to discard changes to a policy in Policy Manager Console
Read more
Issue:
I made policy settings changes which I do not wish to save and distribute to the hosts. How can I discard changes to a policy in Policy Manager Console?
How to view the settings changes made to a certain policy before distribution?
Resolution:
You can discard the settings changes with the following steps:
- Open the Policy Manager Console
- Click File > Discard policy changes in the top left corner
To view what settings had been changed in a policy, right-click on the host or policy domain from the domain tree and select Show Modified Settings.
-
How to configure a persistent data storage or volume for downloaded signatures on Atlant ?
Read more
Issue:
Following the guide at:
https://gallery.ecr.aws/withsecure/atlant
How to configure a persistent data storage/volume for downloaded signatures. Especially during development/testing phases it is quite useless to load signatures over and over again on every container restart?
Resolution:
To just map a local directory or a docker volume as the Atlant container's update directory with -v option to the docker run command.
Example:
# Create a Docker volume
docker volume create atlant_data# Run the container with the volume
docker run --rm -v atlant_data:/opt/withsecure/atlant/updates -v /home/jaalsa/atlant-container/config:/etc/opt/withsecure/atlant/config:ro -p 8080:8080 -p 1344:1344 atlant:latest
So, the essential part is
-v atlant_data:/opt/withsecure/atlant/updates.This will prevent unnecessary downloads. Also, one must be careful to not run two containers with the same volume/path.
-
How to disable TLS1.0 and TLS1.0 in Policy Manager Server on Windows?
Read more
Issue:
How to disable TLS1.0 and TLS1.0 in Policy Manager Server ?
Resolution:
The Java system properties for Policy Manager Server (PMS) can be specified via the Windows registry:
- Run Regedit as administrator.
- Create the following string registry
key: HKEY_LOCAL_MACHINE\SOFTWARE(Wow6432Node)\Data Fellows\F-Secure\Management Server 5\additional_java_args
- Specify the Java system properties in the following format:
-DenableVistaInteroperability=false
- Restart the Policy Manager Server service to make the new configuration take effect.
Reference: https://community.withsecure.com/en/kb/articles/5631-policy-manager-advanced-configuration-settings
If issue persists , can try add -DenableVistaInteroperability=false - -DenableWindowsServer2012Interoperability=false and restart service.
For v16.00 value should be set at HKLM\SOFTWARE\WithSecure\Policy Manager\Policy Manager Server\additional_java_args
Usually, no need to touch httpsCipherSuites values