Support articles

Other WithSecure Products

  • How to perform FSAUA virus pattern database reset in Linux based products

    Read more
    Issue:

    How can I perform FSAUA database reset in WithSecure Linux based products?

    Resolution:

    Steps to do FSAUA database reset are different for each of the following WithSecure Linux based products.

    • Linux Security Full / Command-line Edition version 11.xx
    • Linux Gateway version 5.xx
    • Policy Manager for Linux version 12.xx/13.xx

    You can refer to the following detailed instructions for each product.

    Note: 

    • All steps require root privileges
    • Latest fsdbupdate9.run can be downloaded here
    1. Linux Gateway
    Run the following command in the environment installed with Linux Gateway. This will force the F-Secure Automatic Update Agent (AUA) to download again all database packages.
     
    # cd /opt/f-secure/fsigk; make stop
    # ps -efl | grep fsupdated   
    (check the running status of fsupdated process)

    # kill <PID of remaining fsupdated process>   (if there is any remaining one, kill it)
    # rm -rf /opt/f-secure/fsigk/fsaua/data/content/*
    # cd /opt/f-secure/fsigk; make start
    # /opt/f-secure/fsigk/dbupdate  (with internet access)
     or
    # /opt/f-secure/fsigk/dbupdate fsdbupdate9.run  (without internet access)  
    1. Policy Manager for Linux version 12.40 and older
    Run the following command in the environment installed with Linux Policy Manager Server. This will force the F-Secure Automatic Update Agent (AUA) and F-Secure Automatic Update Server (AUS) to download again all database packages.
     
    # /etc/init.d/fsaua stop
    # /etc/init.d/fspms stop (check the running status of F-Secure process. if there is any remaining one, kill it)

    # rm -rf /var/opt/f-secure/fsaua/data/content/*
    # rm -rf /var/opt/f-secure/fsaus/data/db
    # rm -rf /var/opt/f-secure/fsaus/data/misc
    # rm -f /var/opt/f-secure/fspms/logs/fspms-fsauasc.state
    # rm -f /var/opt/f-secure/fsaua/data/subscriptions/*
    # /etc/init.d/fsaua start
    # /etc/init.d/fspms start
    # sudo -u fspms /opt/f-secure/fspms/bin/fsavupd –debug     (with internet access)

     or
    # ./fsdbupdate9.run (without internet access) 
    1. Policy Manager for Linux version 13.00 and above
    Run the following command in the environment installed with Linux Policy Manager Server. This will force GUTS2 to download again all database packages.
     
    # /etc/init.d/fspms stop (check the running status of F-Secure process. if there is any remaining one, kill it)
    # rm -rf /var/opt/f-secure/fspms/data/guts2/*
    # rm -rf /var/opt/f-secure/fsaus/data/db
    # rm -rf /var/opt/f-secure/fsaus/data/misc
    # rm -f /var/opt/f-secure/fspms/logs/fspms-fsauasc.state
    # /etc/init.d/fspms start
    1. Linux Security Full Edition
    Run the following command in the environment installed with Linux Security. This will force the F-Secure Automatic Update Agent (AUA) to download again all database packages. 

    # /etc/init.d/fsma stop
    # /etc/init.d/fsaua stop
    # ps -efl | grep fsupdated   (check the running status of fsupdated process)
    # kill <PID of remaining fsupdated process>   (if there is any remaining one, kill it)

    # rm -rf /var/opt/f-secure/fsaua/data/content/*
    # /etc/init.d/fsaua start
    # /etc/init.d/fsma start
    # dbupdate
     (with internet access)
     or
    # dbupdate fsdbupdate9.run (without internet access)
     

    1. Linux Security Command-line Edition
    Run the following command in the environment installed with Linux Security. This will force the F-Secure Automatic Update Agent (AUA) to download again all database packages. 

    # /etc/init.d/fsaua stop
    # /etc/init.d/fsupdate stop
    # ps -efl | grep fsupdated   (check the running status of fsupdated process)
    # kill <PID of remaining fsupdated process>   (if there is any remaining one, kill it)
    # rm -rf /var/opt/f-secure/fsaua/data/content/*
    # /etc/init.d/fsaua start
    # /etc/init.d/fsupdate start
    # dbupdate
     (with internet access)
     or
    # dbupdate fsdbupdate9.run (without internet access)

  • How to set up forwarding alerts to syslog server from Policy Manager?

    Read more
    Issue:

    I have a syslog server, how can I forward alerts from Policy Manager Server?

    Resolution:

    You can set Policy Manager to forward alerts to a third-party syslog server.

    Currently, both TCP and UDP transport protocols are supported.

    To configure syslog alert forwarding:

    1. Select Tools > Server configuration from the menu.
    2. Click Syslog.
    3. Select Forward alerts to syslog and enter the server address.
    • By default, alerts are forwarded to syslog using UDP port number 514. If you want to use a different port, enter the port number after the server address, for example, test.com:8080.
    1. Select the message format.
    • Both Syslog (RFC 3614) and Common Event Format messages are supported.
    1. Click OK.
  • How to set up firewall automatic selection in WithSecure Policy Manager

    Read more
    Issue:

    How does the firewall automatic selection in Policy Manager work? How to set up the automatic selection profile?

    Resolution:

    To set the firewall automatic selection profile changes to work, create the auto select rule based on conditions such as gateway IP, DNS, etc.

    As an example, when the Windows Firewall profile is changed to different networks (public, private, domain), there is network change happening too. This can be used as the condition for firewall automatic selection rule to trigger.

  • How to upgrade WithSecure Client Security or Server Security using the Policy Manager Console?

    Read more
    Issue:

    How to centrally upgrade WithSecure Client Security or Server Security to a newer or latest version using the Policy Manager Console?

    Resolution:

    Both Client Security and Server Security can be centrally upgraded to a newer version from the Policy Manager Console. Follow these steps to upgrade:

    1. Download the latest version of the Client Security or Server Security .JAR installation file:
      • Client Security .JAR file here.
      • Server Security .JAR file here.
    2. Log in to the Policy Manager Console
    3. Go to the Installation tab
    4. Click Installation packages > Import to import the installation file
    5. Select a policy domain or a client host from the the Domain tree
    6. Click on "Upgrade" under the "Actions"
    7. Select the installation package, then press OK
    8. Follow the Setup Assistant
    9. Distribute the policies (Ctrl-D)

    Once the client receives the latest policy, it will automatically silently upgrade to the newer version. 

    In case if the Setup Assistance is not offered after selecting the package, remove and re-import the package.

  • How to set the Policy Manager Server to accept remote Policy Manager Console connections

    Read more
    Issue:
    • Policy Manager Server is rejecting Policy Manager Console connections from a remote host. 
    • When trying to connect to Policy Manager Server running on Linux using a Windows machine, the following error is displayed: "Cannot connect to server 172.16.0.6:8080. Check that the host name and port number are correct. Port number 8080 is used by default".
    • When checking netstat output on a Windows server running the Policy Manager Server, the administration module (default port 8080) is listening on Local address 127.0.0.1
    Resolution:

    By default WithSecure Policy Manager Server is set up to only accept connections from localhost. Follow the steps below to allow remote connections and then test the connectivity from the remote Policy Manager Console.

    If Policy Manager Server is installed on a Windows OS:

    1. Stop the Policy Manager Server service, use command prompt command:
      • Policy Manager 15: net stop fsms
      • Policy Manager 16: net stop wspms
    2. Open the Windows registry editor (regedit)
      • Policy Manager 15: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Data Fellows\F-Secure\Management Server 5 
      • Policy Manager 16: HKEY_LOCAL_MACHINE\SOFTWARE\WithSecure\Policy Manager\Policy Manager Server
    3. Edit the value of [REG_DWORD] RestrictLocalhost to 0
    4. Start the F-Secure Policy Manager Server service:
      • Policy Manager 15: net start fsms
      • Policy Manager 16: net start wspms

    If Policy Manager Server is installed on a Linux OS: 

    1. Stop the Policy Manager Server daemon (/etc/init.d/fspms stop)
    2. Open the file /etc/opt/f-secure/fspms/fspms.conf
    3. Check the line adminExtensionLocalhostRestricted value and make sure the value is set to false
    4. Save the file and restart the Policy Manager Server daemon (/etc/init.d/fspms restart)

            Note: Alternatively, you could also run the following command to change the configuration to accept the remote Policy Manager Console connections.

             /opt/f-secure/fspms/bin/fspms-config

    Once Policy Manager Server service has restarted, try to login from the remote Policy Manager Console.

  • How to exclude a folder or file from real-time scanning and DeepGuard in Policy Manager?

    Read more
    Issue:

    Steps to exclude a folder or file from real-time scanning and DeepGuard for Client Security and Server Security in Policy Manager Console

    Resolution:

    You can exclude a file or folder from Real-time scanning and DeepGuard by following the steps below:

    1. Log into Policy Manager Console
    2. Click on Settings
    3. Select Standard view
    4. Select Real-time scanning
    5. Scroll down to Files and applications excluded from scanning
    6. Select Do not scan the following files and applications
    7. Click Add
    8. Enter the full path for each files, folder or SHA-1 of the application. Example:
    • Select File path if the file that you want to exclude always uses the same path.
    • Select Folder path if you want to exclude all files in a specific folder.
    • Select Application SHA-1 if the path for the file that you want to exclude may vary across different hosts.

      NOTE:
      If the file or folder is located in share drive, you need to add the exclusion in UNC format.
      Example:
      \\servername\share\folder\to\the\app.exe

      If this location is also mapped to a drive letter (e.g. N:\), then another exclusion must also be added in the mapped format as the following:
      N:\folder\to\the\app.exe

      For more information on using wildcards in exclusions, refer here
             
       
            9. Click the icon to distribute the policy (Ctrl + D)

    1. How to upgrade WithSecure Policy Manager to a newer version on a Windows Server?

      Read more
      Issue:

      How to upgrade WithSecure Policy Manager to a newer version on a Windows Server?

      Resolution:

      It's highly recommended that you first back up your existing WithSecure Policy Manager data before upgrading:

      1. Create a full backup of the WithSecure Policy Manager data (H2 database, preferences and other files). The backups are stored in the <F-Secure installation folder>\Management Server 5\data\backup folder. For more information about how to do a full backup, consult the Policy Manager Administrator Guide.
      2. Download the newest WithSecure Policy Manager installation file from the downloads page
      3. If the Policy Manager Console is running, close the application before starting the upgrade.
      4. Run the Policy Manager setup on a computer that has the Policy Manager components installed
      5. The Policy Manager setup recommends that you upgrade the components that are installed on the computer. Continue with the default options to upgrade the installed components while keeping the existing configuration.
    2. How to exclude a domain or specific website from Web Content Control disallowed site categories?

      Read more
      Issue:

      How to exclude a domain or specific website from Web Content Control disallowed site categories? The site belongs to a blocked category but users need to be able to access it. 

      Resolution:

      If a website or domain has been assigned a category that the administrator wants to have as disallowed, the Trusted sites exception list can be used to allow users to access the site. 

      The administrator can add the site as trusted by following these steps:

      1. Log in to Policy Manager Console
      2. Highlight a host or policy domain from the Domain Tree
      3. Go to the Settings tab
      4. Go to Web content control settings
      5. Click Add from the right side of the Trusted sites list
      6. Add the site or domain URL in the address field
      7. Distribute the policy

      Once the policy has been distributed, users will be able to access the site even though it belongs to a disallowed site category.

       

    3. How to report or submit a false positive or false negative in Messaging Security Gateway (MSG)

      Read more
      Issue:

      Submitting a False positive or False negative for MSG

      Resolution:

      This article explains how you can send false spam positives and false spam negatives to Proofpoint for further analysis.
       

      Both administrators and end users can report false positives and false negatives. For end users, the administrator must first enable end user digests. End users can then report false positives and false negatives from the digest. Reporting false negatives requires the use of the Audit folder in the Quarantine.

      It also requires setting up a Spam Reporting Group.
       

      False negatives

      False negatives are messages that are considered spam by the end user, but since they were scored below 50 by the MLX engine, they were delivered to the end user. By reporting these messages to the Proofpoint Attack Response Center (PARC), you can help improve spam effectiveness against that specific type of message.

      In order to fully examine the reported message, PARC requires the entire original/unaltered message. Since the best way to capture the original message is in the quarantine (before it arrives at your mail server), we use the "Audit Messages" feature to store Not Spam messages in the Audit folder.

      There are two steps required to enable the reporting of false negatives:

      • Enable Auditing in all Spam Policies
      • Enable Audit Messages for users

      Enable Auditing in all Spam Policies

      This option will quarantine (into the Audit folder) any message (<200K) marked as Not Spam that is also not being quarantined by any other rule.

      1. Click Spam Detection > Policies.
      2. Edit the Default policy.
      3. Edit the Not Spam rule.
      4. Select the Include in Audit folder box.
      5. Click Save Changes.
      6. Repeat these steps for all other spam policies.

        Note: The "Not Spam" messages will not be copied into the Audit folder until the "Audit Message" feature is actually enabled for one or more users (next step).

      Enable Audit Messages for users

      Navigate to Groups and Users / Users and select the checkbox next to each user who will use this feature.

      1. Click the Groups button.
      2. Under "Available Groups" column, click Spam Reporting, then click >> to move it under the "Add" column.
      3. Click Save Changes.

      Once these steps have been completed, mail marked as "Not Spam" will begin appearing in the Audit folder in the quarantine.

      For performance reasons, we do not recommend that you enable Audit Messages for all users. If you do decide to enable it for all users, do so on Groups and Users / Global.

      False positives

      False positives are messages are scored as spam but are considered valid e-mail by the end user. False positives are very rare and are treated with the highest priority by Proofpoint. Digests allow for the reporting of false positives in the default configuration. Users click the Not Spam link next to an individual message and that e-mail is then delivered directly from the Quarantine to the Proofpoint Attack Response Center.

      If this link does not appear in your digest, check the following:

      1. Click Digest / Commands / Display Spam False-Positive Link (on).
      2. Click Digest / Filters / Modules. Click Spam, Options and then Digest Commands. "Report False Positive Spam" should be on the right-hand side.
      3. Digest / Content / Labels. Verify the name assigned to "Report False Positive Spam".

      Reporting directly from the Quarantine

      An administrator can perform the same reporting function, but directly from the Quarantine:

      1. Navigate to Quarantine / Messages.
      2. Search for message by Subject, Sender, Recipient, etc.
      3. Select the checkbox next to the message and click Options / Report.

      If you do not want your users to be able to report messages directly from their digest, and wish to only have administrators report directly from the quarantine, change the following options:

      • Digest > Commands. Disable "Report False Positive Spam".
      • Digest > Commands. Disable "Report False Negative Spam".
      • Groups and Users > Groups. Select the checkbox next to Spam Reporting and click Attributes. Set "Include Audit Messages in Digest" to "Default" and save.

      These changes will still store both spam and not spam in the quarantine, but the end users will no longer see the Audit section in their digest and they will no longer see the "Not Spam" option in the Quarantine section.

    4. How to configure the Business Suite Client Security or Server Security host ID in a machine creation service environment (Citrix Golden Image / Master Image)

      Read more
      Issue:

      How to configure the Business Suite Client Security or Server Security host ID in a machine creation service (MCS) environment. 
      For instance, a Citrix Golden Image / Master Image

      Resolution:

      First you need to know which behavior you are aiming for.

      Here are the most common one:

      Clients are created recurring every day from the Golden Image / Master Image and should retain their WithSecure Unique ID known to the Policy Manager
      1. Boot into your golden image
      2. Open a command prompt as administrator
      3. Change the working directory to C:\Program Files (x86)\F-Secure\<Client Security or Server Security>\
      4. Run the following tool with these options to use either the SMBIOS GUID, WINS name, or MAC address when the product reports to the PM Server.

        resetuid.exe resetuid <SMBIOSGUID or WINS or MAC>

        NOTE: DO NOT run resetuid with the APPLYNOW parameter in this case.

      5. Shut down and save the state of the golden image

        NOTE: No more reboot at this stage, otherwise the process until step 4 has to be repeated

      When deploying a new virtual machine from the golden image, the deployed virtual machine will render the Unique ID based on either the SMBIOS GUID, WINS name or MAC address.

      As long as the Unique ID will not change from the deployed virtual machine, it will remain known to the Policy Manager and will only have to be imported once.
       

      Clients are created recurring and should always be considered as a new host to the Policy Manager
      1. Boot into your golden image
      2. Open a command prompt as administrator
      3. Change the working directory to C:\Program Files (x86)\F-Secure\<Client Security or Server Security>\
      4. Run the following tool with these options:

        resetuid.exe resetuid randomguid

        NOTE: DO NOT run resetuid with the APPLYNOW parameter in this case.

      5. Shut down and save the state of the golden image

        NOTE: No more reboot at this stage, otherwise the process until step 4 has to be repeated

      When deploying a new machine from this master image, the deployed machine will render the WithSecure Unique ID based on a random GUID string

      This approach will create a "new" host for the Policy Manager Server with every new machine deployment. 

      One functionality that might help here are the import rules, explained in this help guide.