-
How to stop Linux Security 64 scheduled scan?
Read more
Issue:
How to stop Linux Security 64 scheduled scan? fsanalyze command can be stopped by terminating that command/terminal. However, we cannot see the progress of scheduled scan in LS64.
Resolution:
Stop the LS64 service by using "master-switch" command.
/opt/f-secure/fsbg/bin/master-switch ( on | off | status )
For further information for this command.
https://www.withsecure.com/userguides/product.html#business/linux-security-64/latest/ja/concept_5BC18AEF5A524D158A7744035B4EE4E1-latest-ja -
How to export the Device Control hardware devices list in Policy Manager in CSV format?
Read more
Issue:
How to export the Device Control hardware devices list in Policy Manager in CSV format?
Resolution:
Follow these instructions to export the Device Control hardware devices table as CSV:
- Highlight the policy domain from the Domain Tree
- Go to the Settings tab and select Advanced View
- Navigate to F-Secure Device Control > Settings > Devices > Hardware Devices
- Right click table and choose Export table content
-
How to hide the real-time scanning exclusions or other exclusions from users in the local Client Security or Server Security user interface?
Read more
Issue:
How to hide the real-time scanning exclusions or other exclusions from users in the local Client Security or Server Security user interface?
Resolution:
There is a setting in Policy Manager Console 16 with which you can enable or disable hiding of exclusions from users.- Log in to the Policy Manager Console
- Select a host or policy domain from the domain tree
- Go to the Settings tab
- Go to the Centralized management settings page
- Under Local User Interface, enable or disable Hide exclusions from clients by clicking the checkbox.
- Distribute the policy (Ctrl + D)
In Policy Manager 15 versions, you can hide the user interface completely from Policy Manager console.- Settings > Centralized management > Local user interface
-
How to change the alert settings for virus definitions in the Policy Manager?
Read more
Issue:
Where do you change the settings about alerts and when virus definition updates are considered outdated (old)?
Resolution:
In order to change these parameters, do the following:
- Log in to your Policy Manager Console
- Select a host or policy domain from the domain tree
- Go to Settings tab
- Navigate to the Windows > Centralized management settings page
- Scroll down to the Automatic updates section
- Change the values for:
- Time limit for considering update databases old (in days)
- Time limit for considering update databases very old (in days)
- Distribute the policy (Ctrl + D)
-
How do I run a manual scan using the command line on WithSecure Server Security or Client Security?
Read more
Issue:
How do I run a manual scan using the command line on WithSecure Server Security or Client Security?
Resolution:
The command line option to execute a manual scan can be either used to run a scan on-demand. Additionally the command and the arguments can be used to fill the "Generic" scheduled scan task specific parameters.
To run the task locally via command line:
- Press the Windows button
- Search for cmd.exe and press Enter
- Navigate to the client's installation directory (for example: cd C:\Program Files (x86)\F-Secure\)
- For Client Security, navigate further to the Client Security directory. For Server Security, navigate to the Server Security directory.
- Type in fsscan.exe and add any of the below arguments/options, then press Enter
- The scan will be executed and further details will be returned in the command window
Example 1
Retrieving information on available options:C:\Program Files (x86)\F-Secure\Client Security>fsscan -?
Usage: fsscan [options]
Options:
--sched, -s Runs a scan optimized for scheduled scanning --target, -t <target> Scans the given <target> (not supported since CS 15.11) --report, -r <report> Writes an unformatted report to <report> file (only with -c) --delete, -d Deletes all harmful files found --collection, -c Runs a scan optimized for large collections of harmful files --noflyer, -f Skip showing scheduled scanning flyer -?, -h, --help Displays this help Example 2
Scanning a specific directory (downloads directory of the user Foo):C:\Program Files (x86)\F-Secure\Client Security>fsscan.exe -t C:\Users\Foo\Downloads\
Setting up a scheduled scan on a specific directory via Policy Manager Console:
- Log on to your Policy Manager Console.
- Select the Policy domain
-
How to disable or enable Client Security automatic updates in the local user interface and via Policy Manager Console?
Read more
Issue:
How to disable or enable automatic updates locally and via Policy Manager Console?
Resolution:
For Client Security clients, you can disable automatic updates by following these steps:
- Log into Policy Manager Console
- Highlight a host or policy domain from the domain tree
- Go to the Settings tab
- Go to the Centralized management page
- In the Automatic updates section, disable Enable automatic updates
If set to 'Disabled', Automatic Update Agent will not automatically check for any kind of new updates. This does not prevent user initiated updates ('check now' button).
Note: This setting is only applicable for Client Security and does not apply for Server Security.
It is not possible to disable automatic updates from the Client Security local user interface.
If you need to manage the updates differently, you can also change the polling interval. Set it to a longer time period, for example one week or month. When you would like the clients get the updates, you can temporarily set it back to a shorter time period.
How to change the settings via Policy Manager Console:
- Log into the Policy Manager Console
- Highlight a host or policy domain from the domain tree
- Go to the Settings tab
- Go to the Windows > Centralized management page
- In the Automatic updates section, change the setting Interval for polling updates from Policy Manager Server
-
How to change Policy Manager Server address for Client Security/Server Security to a new Policy Manager Server address
Read more
Issue:
How to change Policy Manager Server address of Client Security or Server Security to a new Policy Manager Server address.
Resolution:
After migrating the Policy Manager Server data to a new server, you can follow these instructions on the old Policy Manager Server to have the clients connect to the new address. If you have not migrated the Policy Manager Server to a new server yet, you can find the instructions here: How to migrate the Policy Manager Server to the new Windows Server? - WithSecure Community
How to change the Policy Manager Server address of the hosts to refer to the new Policy Manager Server address:
- In the old Policy Manager Server, navigate to:
- - Settings -> Centralized management -> Policy Manager Server host communications settings
- Change the Policy Manager Server address to the new Policy Manager Server
- Distribute the policies to the hosts (Ctrl + D)
If the old Policy Manager Server is no longer available, the options are:
- Uninstall the current Client Security and / or Server Security installations and reinstall the clients using an installation package exported from the new Policy Manager server and pointing to the correct Policy Manager Server address.
- You need a keyreplacer package, which can be provided by WithSecure Support. This tool when executed, allows the Policy Manager address to be changed by executing a file locally on the client.
- In the old Policy Manager Server, navigate to:
-
How to allow a local user to unload or turn off WithSecure Client Security or Server Security security features?
Read more
Issue:
How to allow a local user to unload / disable / turn off all security features of WithSecure Client Security and Server Security through Policy Manager?
Resolution:
Follow these steps to allow local users to unload / disable WithSecure Client Security and Server Security security features on their computer:
- Log in to the Policy Manager Console
- Select a host or policy domain from the domain tree
- Go to the Settings tab
- Go to the Windows > Centralized management settings page
- In the Bypassing product security section, for Allow users to unload products, select Allowed always from the drop-down menu
- Distribute the policies (Ctrl + D)
Now the users can unload / disable / turn off Client Security security features locally on their computers.
How to disable locally on Client Security or Server Security clients:
- Open the Client Security or Server Security local user interface
- Click on the More options icon (three dots)
- Click Turn off all security features
-
How to allow Client Security or Server Security to download updates from back-end when product is unable to connect to Policy Manager
Read more
Issue:
How to allow Business Suite Client Security or Server Security client to download malware definition updates from back-end update server when product is unable to connect to Policy Manager Server?
Resolution:
By default, the client will failover to the Withsecure / F-Secure update server, guts2.sp.f-secure.com, when the Policy Manager Server is not reachable. If the client has been set to not to be allowed to download updates from the update server, here are the steps how to allow it.
Follow these steps to allow the client to fallback to the WithSecure or F-Secure Update Server:
- Log in to the Policy Manager Console
- Select a policy domain from the domain tree
- Go to the Settings tab
- Go to the Centralized Management settings page
- Scroll down to the Automatic updates section and enable Allow falling back to WithSecure update server if Policy Manager Proxies are inaccessible
- Distribute the policy (Ctrl + D)
Important: The device where Client Security or Server Security is installed, must be able to reach the F-Secure update server. The address is guts2.sp.f-secure.com. The HTTP port 80 is is used by default when connecting to the update server, but if Use HTTPS to download updates is enabled, then port 443 is used.
The following setting determines how soon the client will failover to the WithSecure / F-Secure update server, when the Policy Manager Server is not reachable:
Settings (Advanced view / 13.x and older hosts) > F-Secure Automatic Update Agent > Settings > Communications > PM Proxies > Intermediate Server failover time
Note: You need to enable Advanced view from the Tools > Preferences.
NOTE: failover range can be set between 1 hour and 256 days.
-
How do I migrate from Client Security to Elements Endpoint Protection (EPP for Computers) using Policy Manager?
Read more
Issue:
How can I migrate from Client Security to Elements Endpoint Protection for Computers using Policy Manager?
Resolution:
You can follow the steps explained here on migrating from Client Security to EPP for Computers using Policy Manager Console.