Support articles

Extended Detection and Response

  • How to make a custom view on the Devices page in the Elements portal?

    Read more
    Issue:

    How to make a custom view in the Environment > Devices page in the Elements Security Center portal? I want the Devices view always to open by default with the specific filters and info columns. The view should also be remembered when the browser window / tab is refreshed. 

    Resolution:

    You can create custom views with pre-defined filters and informational columns by following the steps below. 

    Here is how you add, remove and sort informational columns: 

    1. Log in to the Elements Security Center portal: https://elements.withsecure.com
    2. Navigate to the Environment > Devices page in the Elements portal
    3. Click on the three vertical lines on the top-right corner of the devices table and select the columns you want to have in your view from the Available columns section. Any selected columns will be added to the Visible columns section.
      1. Note: You can also drag the column names up and down in the Visible columns section. 

    Here is how you add filters:

    1. Click Clear all filters to remove currently selected filters
    2. Open the Select field drop-down menu from the top-left corner of the devices table
    3. Select the filter
    4. Then select either Equals or Not equals 
    5. Finally select the value and Click Apply
      1. Note: You can add several filters 

    After you have the informational columns and filters to your liking, you can save the current view as the default custom view so that it will always show this view then you enter the Devices page:

    1. Open the View drop-down menu in the top-right corner
    2. Click Save as...
    3. Enter a name for the view
    4. Toggle Set as default 
    5. Click Save

    Note that when you create a view, it is by default a personal view for you and it wont be visible for other users. If you are a partner user, this view will be available for you under all customer organizations. 

    If you wish to make the view visible to all users in your organization, you can follow these steps:

    1. Open the Views drop-down menu
    2. Hover your mouse on top of the view and click on the three dots
    3. Select Move to organization views 
  • Microsoft Windows DirectAccess connection disconnects when Elements Endpoint Protection firewall profile is enabled

    Read more
    Issue:

    Microsoft Windows DirectAccess connection disconnects / cuts off / drops intermittently when Elements Endpoint Protection firewall profile is enabled.
     

    Resolution:

    If you are using WithSecure firewall profile, it will by default block unknown outbound connections, so you will need to make sure that you have all the required firewall rules in place if you want to have the DirectAccess connection working. 

    Please follow this Microsoft guide regarding Direct Access firewall rules: Step 1 Plan the Advanced DirectAccess Infrastructure | Microsoft Learn

    Note that if you use GPO to configure the Windows Firewall, in most cases it is best to turn off the WithSecure firewall profiles to avoid conflicts, since GPO firewall rules will always override any WithSecure created firewall rules. To turn off the WithSecure firewall profile:

    1. Log in to the Elements Security Center portal
    2. Navigate to the Security Configurations > Profiles page
    3. Open the profile that is in use on the devices
    4. Go to the Firewall settings page
    5. In the Global setting section, from the WithSecure firewall mode drop-down menu, select Do nothing
    6. Click Save profile
  • How to change WithSecure Business Account administrator user name or email address in Elements Security Center?

    Read more
    Issue:

    How to update WithSecure Business User Account (administrator) username or email address in the Elements Security Center portal?

    Resolution:

    A user can change their own WithSecure Business Account email address using the Elements Security Center portal:

    1. Log in to the Elements Security Center: https://elements.withsecure.com
    2. Click on the user icon in the top right corner
    3. Select My settings 
    4. Click the Change email button 
    5. Edit the email address and click Save ​​​​​​​
      • Note: Your username is automatically made to match your email address. If currently your email address is already correct while your username isn't, you can temporarily change to a firstname.lastname+whatever@domain.com address and then change back to your correct firstname.lastname@domain.com address, so that you get your username and email address to match.

    Note: If you are a Partner Portal user or eService portal user, your access rights to these portals' are tied to the email address, so changing your email address can lead to losing access to these portals.

    If you are a partner, open a support request through the Partner Portal to have the email address changed. If you are a customer with eService portal access, open a support request through the eService portal. 

     

  • Installation of Elements Agent in an isolated environment using proxy

    Read more
    Issue:

    Can I install Elements Endpoint Protection Agent (EPP for Computers or EPP for Servers) in an isolated environment where the only access to the internet is via a proxy server?

    Proxy information is defined in the Endpoint Protection profile but the installer needs to be able to reach the portal to get it first, which prevents installations from within the isolated environment. How to configure the proxy already during installation of Elements Agent?

    Resolution:

    The Elements Agent installer can be run with the additional parameter --proxy to give the installer the proxy information without the need to fetch profile information from the Elements Endpoint Protection portal.

    Example:
    ElementsAgentinstaller.exe --proxy http://proxy.address:1234

    More information found here: Command-line parameters | Elements Endpoint Protection | Latest | WithSecure User Guides 

    Alternatively, you can use FsMsiTool to create a MSI installer with proxy server address included: Use the WithSecure MSI transformation tool | Elements Endpoint Protection | Latest | WithSecure User Guides 

    If the isolated environment has no channel to the internet at all, installation of Elements security products will not be possible, since the Elements Agent needs to be able to connect to the Elements portal for license registration. 

  • Why does Elements Application Control not block an application, even if Global rule is set as Block all untrusted applications

    Read more
    Issue:

    Why does Elements Endpoint Protection Application Control  feature not block an application, even if Global rule is set as "Block all untrusted applications". 

    How to know which applications are allowed by the Application Control feature when Global rule is set as "Block all untrusted applications"

     

     

    Resolution:

    In case you set the Elements Endpoint Protection Application Control Global rule is to "Block all untrusted applications", Application Control will allow applications to run if they:

    • Are running from SYSTEM account
    • Have a target prevalence greater than 40 and reputation less than 9
    • Application is a known clean application and trusted signed application
    • Application has an explicit allow rule created for it

    Here is an explanation of the target prevalence and reputation values:

    Reputation properties
    Reputation properties can have the following values:

    Range Type Meaning
    0-9 CLEAN Known clean. Allow everything.
    10-79 PROMPT Suspicious or potential unwanted (PUA) or Riskware. Prompt the action from the local user.
    80-89 UNWANTED Unwanted Application. Automatic quarantine with option to exclude.
    90-100 BLOCK Known malicious. Block all actions.
    101-999 UNKNOWN Make a local decision. This is the default also when there is no response (empty response).
    Prevalence property
    Prevalence property can have the following values:

    Value Meaning
    0 Undefined or not known. This is the default also when no response or if this flag is missing.
    1 Unique file (3 or less hits)
    10 Very rare file (10 or less hits)
    20 Quite rare file (100 or less hits)
    30 Rare file (1000 or less hits)
    40 Unusual file (10 000 or less hits)
    50 Semi-common file (100 000 or less hits)
    60 Common file (1 000 000 or less hits)
    70 Common file (10 000 000 or less hits)
    80 A very common file (100 000 000 or less hits)
    90 A very very common file (1 000 000 000 or less hits)
    100 Everybody basically has this (10 000 000 000 or less hits)

    We recommend to change the Global rule  to "Allow and monitor all applications" to monitor the situation at first, and slowly creating new Application Control rule(s) to allow the application running in your environment.

  • Mac device missing from Elements portal after using Apple Time Machine or Migration Assistant

    Read more
    Issue:

    Mac device missing from Elements portal after using Apple Time Machine or Migration Assistant. 

    Resolution:

    WithSecure Elements Agent for Mac doesn't support the use of Apple's Time Machine feature or Migration Assistant application. If an existing Elements Agent installation is synchronized from old laptop to new, it will most likely break because both the old and new devices would have the same Unique ID (UUID), therefore the Elements portal would recognize them as the one and the same device and only one would be visible in the Elements portal. 

    Both software can cause also other issues with the Elements Agent installation. We therefore recommend to uninstall Elements Agent using the WithSecure uninstallation tool for Mac and to reinstall Elements Agent if you encounter any issues after using any of these Apple features. 

  • How to prevent a local administrator from stopping WithSecure services of Elements Agent?

    Read more
    Issue:

    How to prevent a local administrator from stopping the services or processes of Elements Agent (EPP for Computers or EPP for Servers) so that the security features cannot be turned off? 

    Resolution:

    WithSecure Elements Endpoint Protection products include the Tamper protection feature that is enabled by default. The Tamper Protection feature will prevent local users from stopping WithSecure services or from modifying the files of the WithSecure software.

    It will also protect the WithSecure processes and files from other application what might try to stop the services or modify the files.

    How to enable Tamper Protection feature for Elements Agent: 

    1. Log in to the Elements Security Center Portal 
    2. Go to the Security configurations > Profiles page
    3. Click on the profile you want to edit
    4. Go to the Scanning settings page
    5. Scroll down to the Tamper protection section
    6. Enable Turn on Tamper Protection
    7. Click Save profile
  • Elements Agent Intune deployment fails with "MSI package is obsolete" error

    Read more
    Issue:

    When installing Elements Agent (Elements EPP for Computers and Servers) via Intune with an older .MSI package the installation fails with error "MSI package is obsolete", how should the threshold parameter be specified?

    Resolution:

    The ElementsAgentOfflineInstaller.msi becomes obsolete after 270 days (9 months) and it shouldn't be used after that. Please download a newer version of the Elements Agent offline installer from the Elements Security Center portal's Management > Downloads page.

     

  • How to list only a specific device's detections on the Broad Context Detections page in the Elements portal?

    Read more
    Issue:

    How to list only a specific device's detections on the Events > Broad Context Detections page in the Elements Security Center portal? There is no "device name" filter option

     

    Resolution:

    On the Events > Broad Context Detections page there is a Data content filter option, which can be used to show specific strings that a detection contains. It can be used to show only detections that contain a specific device name and it can be also be used to show only a specific BCD-ID. 

    1. Log in to the Elements Security Center portal
    2. Navigate to the Events > Broad Context Detections page
    3. Select the Broad Context Detections tab
    4. Click in the filter Choose an option and select Data content
    5. Use the Contains setting
    6. In the Add value field, enter the string that the detection should contain, for example a device's host name
    7. Click Add

    Now the list will show only the detections that include that string. 

  • What determines the automatically given name for a device in the Elements Security Center?

    Read more
    Issue:

    What determines the automatically given name for a device in the Elements Security Center?

    Resolution:

    The name for a device that appears on the Elements Security Center portal's Environment > Devices page is automatically taken from the device's host name if it is a Windows or Linux device. 

    For Android and Apple iOS mobile devices the name of the device is the Last name + First name that were configured when the email invitation was sent.