Support articles

Extended Detection and Response

  • How to exclude specific software updates from Software Updater in WithSecure Elements Endpoint Protection?

    Read more
    Issue:

    How to create an exclusion for a certain software update with the WithSecure Software Updater feature in the Elements Security Center Portal for EPP for Computers or EPP for Servers devices? I do not want to have Software Updater installing updates automatically or have the user manually installing the update.

    Resolution:

    Prerequisite: You need to have a non-default profile before you can configure your software updater settings.

    You can exclude specific software updates from automatic installation or you can include specific software updates in automatic installation by following these steps:

    1. Log in to the Elements Portal: https://elements.withsecure.com
    2. Open the Security configurations section from the menu on the left
    3. Go to the Profiles page
    4. Select the profile you want to modify
    5. Go to Software updater settings tab
    6. Under Exclude from automatic installation, click Add exclusion
    7. Select from the Conditions drop-down menu one of the following:
      • Update name contains
      • Software name contains
      • Vendor name contains 
      • Severity equals to
      • Bulletin ID equals to
    8. Then depending on the rule you've chosen, enter the value to the remaining field. Examples:
      • Update name contains: Google Chrome 89.0.4389.82 (Note: for Microsoft updates, do not include the version number. Use for example only the KB number)
      • Software name contains: Google Chrome
      • Vendor name contains: Google Inc.
      • Severity equals to: Critical Security / Important Security 
      • Bulletin ID equals to: FSPM-41-64283-4 (Note: Same update can have several different Bulletin IDs due to for example Operating system version)

    You can view the update details from the Software Updater page in the Endpoint Protection Portal.

    Note: 

    • Only one software per exclusion is supported. If you need to add multiple software, click Add exclusion again.
    • You can add several conditions in one rule, if you want to combine for example Software name contains and Severity equals to conditions, click Add condition in the Conditions column.

    After the profile has been saved and published, the exclusion/ will be taken into use on the devices that have this profile assigned. 

    If you would like to hide the update completely from being detected as missing by Software Updater, you need to exclude it via the following setting in the Endpoint Protection Portal profile editor:

    1. Log in to the Elements Portal
    2. Under Security Configurations, select Profiles on the sidebar.The Profiles page opens.
    3. Select the For Windows Servers tab or For Windows Computers tab, and then select the profile that you want to edit. The Profile for Windows Servers or for Windows Computers opens
    4. Select the profile you want to modify
    5. Go to Software updater settings tab
    6. Scroll down to the Exclude from scanning section
    7. Click Add exclusion

    When the update is hidden with this rule, the update will not be listed at all in the Software Updates Missing updates tab in the Endpoint Protection portal. It will also not be visible locally on the device for the user.

  • How to change Elements Collaboration Protection Exchange mailbox type between user and non-user?

    Read more
    Issue:

    How to change Elements Collaboration Protection Exchange online mailbox type between user and non-user? 

    Resolution:

    The mailbox type listed in the Elements Collaboration Protection portal has to do with the type of Microsoft 365 tenant / account itself. There are no settings in Elements Collaboration Protection portal to change the mailbox account type.

    The mailbox type will be recognized accordingly by Elements Collaboration Protection portal when a new Microsoft for Office 365 tenant / account has been added to the cloud service, so if the type is wrong currently in the Elements Collaboration Protection portal's Exchange view, you will need to check your mailbox settings from the Microsoft for Office 365 side. 

    Some Microsoft for Office 365 accounts are meant for meetings or other shared uses, thus they are considered as non-user mailboxes.
     

  • How to change device name in the Elements Security Center Portal?

    Read more
    Issue:

    I want to give a different device name to the computer on which I have installed Elements Agent (EPP for Computer or EPP for Servers), how to change the device name (alias) in the Element Security Center Portal?
     

    Resolution:

    Follow these steps to change device name in the Elements Security Center Portal:

    1. Log in to the Elements Security Center Portal: https://elements.withsecure.com
    2. Navigate to the Environment > Devices page
    3. Click on the device in the list
    4. Click add alias on the right side of the device name
    5. Enter the new name and click Save
  • How do I generate WSDiag diagnostic logs on WithSecure Mac products?

    Read more
    Issue:

    How do I generate WSDiag diagnostic logs on WithSecure Mac products?

    Resolution:

    Please follow the steps below on how you can create a WSDiag logfile on a Mac.
     

    1. Click on the Withsecure icon on the Menu Bar (top right)
    2. Select 3 horizontal lines.
    3. Click on "Settings..."
    4. On the new window, click on Support.
    5. Select Open support tool.
    6. Select Run diagnostic.
    7. Enter your password.
    8. If there is a prompt to allow, please select Allow.
    9. Save the file on Desktop.
    10. Attach the logfile to the reply email.

    If the product installation has failed and you do not have the WithSecure Support Tool available in the product folder under Applications, you can use the stand alone support tool to gather a diagnostic file:

    1. Download the stand alone Withsecure Support Tool for Mac.
    2. Extract the Support Tool.app from Support Tool.zip.
    3. Run the Support Tool.app.
    4. Select Run Diagnostics on the Support Tool window.
    5. Enter the administrator password for your computer.
      The support tool starts and displays the progress of the data collection.
    6. When the data collection is complete, select where you want to save the resulting tar.gz archive and then select Save.
      The support tool opens a Finder window showing the saved file.
    7. Attach the file to the support case.

    Note: You need administrative rights to run the tool.

  • How is severity of detection determined on Elements Collaboration Protection?

    Read more
    Issue:

    How is severity of detection determined on Elements Collaboration Protection?

    Resolution:

    Severity level indicates whether an administrator action is needed to mitigate the immediate risk.

    Low: No action is needed because the item is coming from a trusted source.
    Medium: No action is needed. The item was automatically either quarantined or deleted.
    High: Action required. No automatic action is specified in the policy.
    Critical: Immediate action is required to mitigate the risk.

  • How to add Elements Collaboration Protection access rights for admins with existing WithSecure Business accounts?

    Read more
    Issue:

    How to add Elements Collaboration Protection access rights for admins with existing WithSecure Business accounts (administrators who already have Elements Endpoint Protection, Endpoint Detection and Response, or Vulnerability Management access rights)?

    Resolution:

    You can add Elements Collaboration Protection access rights for administrators with existing WithSecure user accounts by following these steps:

    1. Log in to the Elements Security Center portal: https://elements.withsecure.com
    2. Navigate to the Management > Organization Settings > Security Administrators page
    3. Click on the user's email address
    4. Enable Collaboration protection roles:
      1. Management role is for admin users who will be able to grant Collaboration Protection access to other users
      2. Collaboration protection role is for the daily admin user who needs to be able to for example create and modify policies, release from quarantine and enable protection for exchange mailboxes.
    5. Click Save 

    Visit this guide for more information.
    https://www.withsecure.com/userguides/product.html#business/fse4ms365/latest/en/task_58D5F1D5EB0B4FEF9F40C94FF84AAD03-latest-en
     

  • Getting a message of "Refresh permissions to Exchange to support the latest features and improvements" on Elements Collaboration Protection portal. What needs to be done to solve this?

    Read more
    Issue:

    Getting a message of "Refresh permissions to Exchange to support the latest features and improvements" on Elements Collaboration Protection portal. What needs to be done to solve this?

    Resolution:

    You need to revisit the Microsoft consent popup by disconnecting and reconnecting Exchange on our Collaboration Protection portal. 

    This is only required for Exchange, not for SharePoint, OneDrive, or Teams.

  • How to add a website URL to trusted websites in Elements Collaboration Protection?

    Read more
    Issue:

    Is there a way to allow a website or add a website URL to be always trusted in the Elements Collaboration Protection configuration policy so that an email containing the website URL is not blocked or quarantined?

    Resolution:

    It is possible to add a website URL to the trusted websites list within the Elements Collaboration Protection policy settings. This way the URL address is whitelisted so that emails including the URL will not be quarantined or blocked. 

    Follow these steps:

    1. Log in to the WithSecure Elements portal: https://elements.withsecure.com
    2. Go to the Collaboration Protection > Policies page
    3. Select the policy that is in use on the cloud service
    4. Go to Exchange > URL scanning > Trusted websites
    5. Turn on the 'Trusted websites' feature
    6. Add the URL in the websites field
    7. Click Save
  • How do I create a custom WithSecure Elements EPP for Computers or for Servers profile in the Elements Portal?

    Read more
    Issue:

    How do I create a custom WithSecure Elements EPP for Computers or for Servers profile in the Elements Endpoint Protection Portal?

    Resolution:

    Here are instructions on how you can create a custom profile which can be edited in the Elements Endpoint Protection Portal:

    Creating a custom profile:

    1. Log in to the Elements Security Center portal
    2. Go to the Security Configurations > Profiles page
    3. Click Create a profile from the top of the page
    4. Enter a name and label of the new custom profile
    5. Edit the profile to your liking
    6. Click Save and publish

    If you want to use an existing profile as a starting point, you can Clone a profile:

    1. Log in to the Elements Security Center portal
    2. Go to the Security Configurations > Profiles page
    3. Click the three dots next to the profile you want to use as the starting point
    4. Select Clone profile
    5. Enter a name and label of the new custom profile
    6. Edit the profile to your liking
    7. Click Save and publish

    Assigning a profile:

    1. Go to the Environment > Devices page
    2. Choose a device to which you want to assign a profile (a menu will appear)
    3. Click on assign profile 
    4. Select the profile from the drop-down menu
    5. Click Assign

    Note: Depending on the internet connection, it can take a up to 30 seconds before the profile is assigned to the device.

  • How to block users from downloading a specific file format with Elements Endpoint Protection?

    Read more
    Issue:

    How can I block the download of a specific file type, for example MP4 or EXE, with Elements Endpoint Protection (EPP for Computers or EPP for Servers)? 

    Resolution:

    EPP for Computers and EPP for Servers have the Browsing Protection feature called Content Type Filtering, which can be used to block specific content types. 

    Note: The content type filtering is only performed if Security Cloud does not recognize the website address (URL) the content originates from.

    1. Log in to Elements Endpoint Protection Portal 
    2. Go to the Profiles page
    3. Select the Profile to modify
    4. Go to the Browsing Protection settings
    5. Click Add Content Type filter:
      • Content Type: application/*mp4*
      • Filename: *.mp4
      • Description: Block MP4 file
    6. Click Save and Publish