Support articles

Extended Detection and Response

  • How to in the Elements portal list only devices with the a Critical importance level?

    Read more
    Issue:

    How to in the Elements Security Center portal on the Environment > Devices list show only EPP and EDR devices that have been assigned the Critical importance level?  

    Resolution:

    You can on the Environment > Devices page in the Elements Security Center portal use a filter to only show devices with a specific importance level. 

    Here are the steps:

    1. Log in to the Elements Security Center portal: https://elements.withsecure.com
    2. Navigate to the Environment > Devices page
    3. With the filter feature on top of the devices table, create a "Device importance - equals - Critical" filter
    4. Click Apply

    Now only the devices which have been assigned the Critical device importance will be listed on the Devices table. 

    To change the importance of a device, select the device from the list and then from the Actions menu at the bottom of the page click Update importance and select either minor, normal or critical from the drop-down menu and then click Update. 

  • Elements Endpoint Protection for Computers getting incorrect update server when using Network Location settings

    Read more
    Issue:

    Wrong 'Update-Server' or proxy server address is shown in the Elements Agent's Updates page even if Network Location settings has been configured to change the proxy server address when device is in a new location. 

     

     

    Resolution:

    We recommend to first check your current setup on the Network locations settings page in the profile:

    1. Log in to the Elements Security Center portal
    2. Navigate to Security Configurations > Profiles
    3. Click on the profile that is in use on the devices
    4. Go to the Network location settings page
    5. Make sure that the trigger or triggers that you have configured are correct
    6. Make sure the rules you have chosen are correct
    7. Click Save profile

    We also recommend to lock the communication settings so that they cannot be changed locally:

    1. Log in to the Elements Security Center portal
    2. Navigate to Security Configurations > Profiles
    3. Click on the profile that is in use on the devices
    4. Go to the End user rights settings page
    5. In the Communication settings section, lock each setting:
      1. User HTTP proxy (updates server)
      2. Use HTTP Proxy (Software Updater)
      3. Proxy servers and WithSecure Connectors
    6. Click Save profile

     

  • Elements EPP for Computers or Servers is showing Security Cloud status as not connected or Status updates as "not latest"

    Read more
    Issue:

    Elements EPP for Computers or EPP for Servers is showing Security Cloud status as not connected or Status Updated as "not latest" in the local user interface Settings > Updates page.

    Resolution:

    We recommend to run the Connectivity Tool (wsconnectionchecker.exe) from C:\Program Files (x86)\F-Secure\PSB\ui on the device, to validate the connectivity state to the WithSecure backend services.

    If this device requires a connection via HTTP proxy to access reach Internet, you have to enable HTTP proxy usage via the Elements Security Center profile editor and enter the proxy address

    Steps:

    1. Log in to the Elements Security Center portal
    2. Navigate to Security configurations > Profiles page
    3. Click on the profile that is in use on the devices 
    4. Navigate to the Communication settings page
    5. Select Remotely Managed from the "Use HTTP Proxy" drop-down menu  
    6. Scroll down to the Proxy servers and WithSecure connectors section
    7. Click Add address 
    8. Enter the proxy address
    9. Click Save profile

    Also make sure that Security Cloud is enabled in the profile:

    1. Log in to the Elements Security Center portal
    2. Navigate to Security configurations > Profiles page
    3. Click on the profile that is in use on the devices 
    4. Go to the Real-time scanning settings page 
    5. In the File scanning section, select either Upload all suspicious files or Upload suspicious executables only from the drop-down menu for Upload suspicious samples to WithSecure Security Cloud
    6. Click Save profile
  • How to restart device at specific time after Elements Endpoint Protection has installed a Software Updater patch?

    Read more
    Issue:

    How to have an Elements Endpoint Protection device restart automatically at a pre-defined time if Patch Management (Software Updater) has installed an update and a restart is required to finish the update? 

    Resolution:

    When Elements Agent is installed on a server, it will never by default force the server to restart. You can use the Automated Tasks feature to schedule a restart to happen within a maintenance window if there is a restart required to finish the installation of an update. 

    Follow the steps below to create a Software Updater installation rule and a restart rule in the profile:

    1. Log in to the Elements Security Center portal: https://elements.withsecure.com
    2. Open Security Configurations > Profiles and select the profile used on the servers
    3. Open Automated Tasks and make sure it is enabled
    4. Add a task with a type such as "Install all security updates", and define a schedule using a CRON expression (for example, Saturdays at 23:00)
    5. Add a second task with the type "Force restart, if required" and schedule it shortly after the installation task
    6. If updates and restarts are only allowed during a maintenance window, disable the Never skip option for the tasks
    7. Click Save profile

    Important notes:

    Task start times are randomized within a one-hour window to reduce network load, so the restart will occur during the selected hour rather than at an exact minute. The schedule follows the server's local time.

    The "If required" restart task will restart the server only if an installed update requires it.

  • Elements portal shows Encrypted drive status as "Recovery information error"

    Read more
    Issue:

    In the Elements Security Center portal the portal shows that the system disk drive is encrypted for a device but it is unable to collect the bitlocker recovery key. 

    On the device details page for a device, it shows under "Endpoint encryption > Encrypted Drives" the following details and error message:

    Drive C (system disk)

    • Encrypted
    • Recovery information error (An error occurred during data collection for the recovery information. Please review the logs.)
    • Pin-code: set 

    Why does Elements Endpoint Protection (Elements Agent) fail to retrieve the BitLocker key from the device? 

    Resolution:

    For example, if BitLocker was enabled using: manage-bde -on C: -tpmandpin

    then it is possible that only a TPM+PIN protector was created and no recovery password protector exists.

    You can run the following command to display the BitLocker protectors configured on the volume: manage-bde -protectors -get C:

    If you only see:

    • TPM
    • TPM And PIN

    and there is no "Numerical Password" protector, then there is no recovery key stored on that device to retrieve.

    manage-bde -protectors -get C: should display the 48-digit recovery password locally.

    When scripting BitLocker deployment, ensure a recovery password protector is added, for example: manage-bde -protectors -add C: -RecoveryPassword <NumericalPassword>

  • Unable to import multiple mobile devices from CSV-file to Elements Endpoint Protection portal

    Read more
    Issue:

    I get the following error: "failed to invite multiple devices via CSV file!", when trying to invite multiple devices to Elements Endpoint Protection portal for Elements EPP for Mobiles (Mobile protection).

    Resolution:

    Make sure you are importing the details in the following CSV format:

    <owner email>;<owner last name>;<owner first name>;<alias>

    Example CSV content:

    test@exampledomain.com;Doe;John;examplealias
    example@testdomain.com;Doe;Jane;examplealias2

    Note: It is recommended to use a text editor which preserves the original encoding, such as basic Windows Notepad. Using some other editor that doesn't preserve the original encoding can break it.

     

  • Active Mailboxes metric in the Home Dashboard may incorrectly show 0 active mailboxes from September 11 onward

    Read more
    Issue:

    Following a Elements Collaboration Protection change on September 10, mailbox usage reporting to the dashboard was unintentionally left disabled. As a result, the Active Mailboxes metric in the Home Dashboard may incorrectly show 0 active mailboxes from September 11 onward.

     

    Resolution:

    This issue was resolved on September 21st, 2026.

  • Linux client installation fails with error "Warning: Installation timed out on setting up SELinux integration."

    Read more
    Issue:

    Elements Linux Protection or Business Suite Linux Security 64 installation fails with error "Warning: Installation timed out on setting up SELinux integration.". 

     

    Full error message: 

    Installing WithSecure Linux Security 64
    Setting up integration with SELinux

    Warning: Installation timed out on setting up SELinux integration.

    Product activation failed to complete successfully. Please check the product
    installation and network connectivity requirements, and retry the installation
    after making changes (if any) to the system configuration. Before contacting
    WithSecure support, please run the command
    /opt/f-secure/linuxsecurity/bin/fsdiag․sh
    to generate a diagnostics package from this system, and attach the package
    (whose file name the command will output) to the support request.
    setup: timed out on setting up SELinux policy integration: failed to find SELinux module withsecure-linuxsecurity-services installed
    2026-09-07 13:06:52 src/fsbootstrap.c:488[7] executing '/opt/f-secure/linuxsecurity/download/linuxsecurity-1200-linux-x86_64/1774510304/content/setup' failed, result 256
    2026-09-07 13:06:52 src/fsbootstrap.c:244[7] install failed
    activate: activation failed: exit status 2
    Failed to activate the product!

    Resolution:

    If you have followed the uninstallation instructions to remove the previous Linux Security 64 or Elements Linux Protection installation and you still receive the "Warning: Installation timed out on setting up SELinux integration." error when trying to install the Linux client, check if you have SELinux in use. 

    If you have SELinux in use and you receive the error message even though you have set SELinux into permissive mode, it could be that the SELinux policy modules of a previous Linux Security 64 or Elements Linux Protection installation cause a conflict with the new modules that the installer is trying to set up. 

    You can use the semodule --list-modules command to list all the modules. If you can see in the resulting list any withsecure or fsecure related modules, please remove them using the semodule -r command.  Then run the command semodule -B to recompile the active policy. 

    After you have done these steps you can try the client installation again. 

     

  • How to configure Elements Endpoint Detection and Response alert email ONLY to be sent when severe or high risk level happened?

    Read more
    Issue:

    Normally, the alert notification email from EDR will be sent when a detection with he risk level at "Severe", "High" and "Medium" has been added to the portal, but is it possible to configure the alert email that ONLY will be notified when "Severe" or "high" risk level has happened?  Is it possible to filter the email alerts coming from EDR? I don't want to get a lot of low risk alert emails, but only medium and higher. Or only higher or severe etc.

    Resolution:

    From the Management > Organization Settings > Detection and Reponse settings tab, it is not possible to edit which classification EDR detections would send emails.

    In this case, you have to use this workaround to generate an email report that only goes when there is High or Severe level detection:

    1. Log in to the Elements portal
    2. Go to Events > Security Events
    3. Apply these two filters:
      • Source Equals EDR 
      • Severity Equals Action needed
    4. Open the view menu on the top right corner and select "Save as" at the bottom of the menu
    5. Give the view a descriptive name and save it
    6. Go to Reports > Email notification and report
    7. Click Add email report
    8. Give it a name you want to see in your email subject
    9. For Data source select Security Events
    10. For template select the view you previously created
    11. Configure schedule and recipient (continuous will send email every even 10 minutes if a new event has appeared)
    12. Leave the Send only when report has content toggle enabled
    13. Click Save

    This report report is sent whenever High or Severe level detection appears on that Security Events page. Unfortunately, it is not possible to choose to send emails only about Severe level detections, because on the Security Events page that Severity equals Action needed filter includes both High and Severe level detections.

    We will be improving those reporting and email features this year, but there is no specific estimate at this time.

    Here you need to note that if you are trying to send a test report from that new report using the Send test report button, remember to first temporarily disable Send only when report has content, because if there is no content in the report, the test report will not be sent either.

    Here is an in more detail explanation why the test report is not being sent: https://community.withsecure.com/en/kb/articles/32337-no-test-report-sent-when-security-events-source-is-used-for-elements-email-notification-and-report

  • How does Network drive scanning work with Elements Endpoint Protection?

    Read more
    Issue:

    How does the network drive scanning work?

    Resolution:

    Scan network drives setting is enabled by default.

    How does it behave?

    • Scanning only happens upon execution of (executable) files on the network drive
    • Basic open / close, copy / paste operations for a file are not scanned
      #For Elements EPP, users can enable real time scan for those actions by setting profile "Scan network drives" as "Scan on any file access".  Note:  scanning files on network drive on every file access can be very slow.

    Testing with EICAR test file:

    • The execution of an eicar.com file will only work on legacy 16-bit systems or those which support it. Most 64-bit systems do not support it and therefor a real time scan test will most likely not trigger an alert on that file.
    • However, the manual/scheduled scan will still detect the file