-
Is it necessary to change any settings in Elements Collaboration Protection side when we have changed our domain name in Microsoft 365?
Read more
Issue:
We have changed our domain name, but Microsoft 365 tenant itself is same as before.
In this case, do we need to change any settings in Elements Collaboration Protection(ECP) side?
So far, old domain name remains in some places in portal.
For example, there are some old domain records remaining in Exchange page and the status is shown as unavailable. Will those old domain records be deleted automatically?
Resolution:
Customer doesn't need to do anything, as the old domain should be deleted automatically in 14 days of being unavailable.
Every time we open summary page in portal, which shows tenant's detailed info, ECP will send API to Microsoft to get the information displayed.
Specifically which part of Microsoft is referred to, or what API is used, is not disclosed. -
Information event "Connection control has blocked the network connection. The blocked application: chrome.exe / firefox.exe / edge.exe" was logged to Elements Security Center portal
Read more
Issue:
An information event "Connection control has blocked the network connection. The blocked application: chrome.exe / firefox.exe / edge.exe" was logged for Elements Endpoint Protection (EPP for Computers or EPP for Servers) on the Security Events page in the Elements Security Center portal
What does this block event mean? Why is no website address (URL) being listed?
Resolution:
Connection Control is also known as "Banking Protection". It is the feature which activates when a user enters a banking site. When Connection Control is active, the browser only allows the user to visit trusted websites.
If a full page is blocked, the user will receive a splash page which alerts the user that a page has been blocked, and if they need to access the page while Connection Control is active, they can allow the website. Sometimes simple analytics addresses are being blocked, which do not affect the user at all, which is why it can get unnoticed by the user and still an alert is sent to the Security Events page.
With the default settings, due to regional legislation differences, the page address is only shown fully to the local user while in the Elements Endpoint Protection portal's Security Events page only the affected browser or process is listed.
You can from the profiles change the following setting if you want the Security Events page to show the website URL:
- Log in to the Elements Security Center portal: https://elements.withsecure.com
- Go to the Security configurations > Profiles page
- Select the profile which is in use on the device
- Go to the Browsing Protection settings page
- In the Common settings section, enable Include the blocked URLs in all security events
- Click Save profile
Note that you need to be sure that your regional legislation allows you to monitor users in such a way.
-
Is it possible to add a domain or address as a trusted sender in Cloud Protection for Microsoft 365?
Read more
Issue:
A lot of emails from trusted senders are quarantined due to including malicious URLs. Is it possible to add a domain or address as a trusted sender in Cloud Protection for Microsoft 365?
Resolution:
If a lot of emails are quarantined due to malicious URLs from trusted senders, you can add them to the trusted senders list by following these steps:
- Log into Cloud Protection Portal
- Go to Policies
- Select policy
- Go to the General settings
- Turn on the Trusted senders feature
- Add the trusted email sender or domain addresses
- Click Save
From the Cloud services page in the portal you can assign different policies for your cloud services.
-
How to verify that suspicious inbox rule was removed by user
Read more
Issue:
Admin received a notification that there is a suspicious inbox rule, advise user to remove the rule. Admin wants to verify that suspicious rule is already removed.
Resolution:
At the moment Collaboration Protection will only report those suspicious inbox rules but do not list the user's rules, admin needs to check directly with user or check if the same suspicious rule is reported again.
-
How to prevent a local user from creating exclusions for Elements Endpoint Protection?
Read more
Issue:
How to forbid a local user from creating real-time scanning or DeepGuard exclusions for Elements Endpoint Protection (Elements EPP for Computers or Servers)?
Resolution:
You can block or disallow a local user from creating or adding new exclusions in the local Elements Agent user interface by changing a few settings in the profile that is in use on your devices.
Follow these steps:
- Log in to the Elements Security Center: https://elements.withsecure.com
- Open the Security Configurations section from the menu on the left
- Go to the Profiles page
- Select the profile that is in use on your devices (note that only custom profiles can be edited)
- Go to the General settings page
- Scroll down to the Quarantine section and disable Allow users to release blocked and quarantined items
- Scroll back up a little to the Exclude folders and files from all security scans section and enable the lock on the right side of the exclusions table
- Click Save and publish
Now all the devices that have this profile in use will have it so that even local users with administrator rights cannot add exclusions, since the Add new button will be grayed out and the setting is locked.
-
Installing Elements EPP for Servers in persistent mode on Citrix servers
Read more
Issue:
How to install Elements EPP for Servers in persistent mode on Citrix Servers?
How to automatically assign a profile to a Citrix Server?Resolution:
- When creating the image with the ElementsAgentinstaller.exe, you can either use a profile parameter or manually define what profile this image will use.
- There is currently no way to automatically assign a different profile for a new device deployed from the golden image for the first time (this is a real limitation). Device will automatically get the default company profile.
- Once you have deployed a new device from the image, you need to do manually assign the profile for this device if you want to use a different profile than what is on the golden image. All the subsequent deployments of that same device will receive the profile that was manually assigned to them.
You can follow the instructions from this Help Guide on how to install Elements EPP for Servers in persistent mode on Citrix servers.
How to set a profile can be found in this Help Guide.
With the ws_oneclient_logout.exe tool found an Example of how to run the tool:How to set up an HTTP proxy for the Gold image?
You can define the HTTP proxy during installation or from the local UI.
To define the proxy address during installation, you can add the following parameter during installation: ElementsAgentInstaller.exe --proxy http://proxyadress:8080
Note: With the ws_oneclient_logout.exe tool, you can change the subscription key, profile and proxy address all at the same time: ws_oneclient_logout.exe --keycode <code> --profile-id <id> --proxy <proxy:port>
-
How to reset the host UID of a WithSecure Elements Agent device?
Read more
Issue:
How to reset the host UUID (Unique ID) of WithSecure Elements Agent (Elements EPP for Computers or Elements EPP for Servers) client?
Resolution:
You can use a tool called ws_oneclient_logout.exe which can be used to reset the GUID for existing Elements Agent installation.
- Open a command prompt with administrator privileges
- Navigate to the installation directory of WithSecure Elements EPP client: %ProgramFiles(x86)%\F-Secure\PSB\
- To change the UID of the host use the following command:
- ws_oneclient_logout.exe --keycode <enter your license keycode here>
For example:
ws_oneclient_logout.exe --keycode xxxx-xxxx-xxxx-xxxx-xxxxNOTE: If you use the ws_oneclient_logout.exe tool with this option (ws_oneclient_logout.exe --wait_uuid_changed), the system waits until the UUID is changed to make sure that the device registers with the correct, unique ID on the WithSecure Elements Endpoint Protection portal. This option works only if SMBIOS is used to identify the device. It has no effect if other identification methods are used. You can read more about this feature here: https://www.withsecure.com/userguides/product.html#business/psb-portal/latest/en/task_05B6F4B3D49D451CBD438312C41C15D3-psb-portal-latest-en
When the host UID is reset, the Elements Endpoint Protection portal will consider the host to be a new device. This can result in duplicate devices visible in the Elements Endpoint Protection Portal Devices page (each device takes a license into use). You can remove the old devices by selecting the device from the Devices list and from the Actions menu you can select Remove device > Remove device.
-
Installing Elements Endpoint Protection using a clone image
Read more
Issue:
How to deploy WithSecure Elements Agent (EPP for Computers or for Servers) using a clone image?
Resolution:
Follow the instructions here for installing the WithSecure Elements Agent using a clone image.
-
Incoming email was delayed to be detected and quarantined on Elements Collaboration Protection and the receiver could see the email and has already sent reply it.
Read more
Issue:
Incoming email was delayed to be detected and quarantined on Elements Collaboration Protection and the receiver could see the email and has already sent reply it.
In the end, the reply was also quarantined but not sent to any destination addresses.
This issue happened only one time and cannot be reproduced again.Resolution:
Generally, delays can happen because our Elements Collaboration Protection system is working in asynchronous way with Microsoft, therefore delays are expected to happen from time to time.
-
How to deploy Elements EPP for Computers (Mac) using Intune?
Read more
Issue:
How to deploy Elements EPP for Computers (Mac) using Intune?
Resolution:
You could follow the instructions below in order to deploy Elements EPP for Computer (Mac) using Intune to your Mac devices.
Note: Make sure that you have added your Mac devices to the Intune Company Portal before proceeding with this deployment. You may refer to the following Microsoft page for more details.
https://learn.microsoft.com/en-us/mem/intune/user-help/enroll-your-device-in-intune-macos-cp
1. Login to Microsoft Intune admin center (https://intune.microsoft.com/#home)
2. Create a new group by following the steps below
2.1. Go to "Groups"
2.2. Click on "New Group"
2.3. Select "Security" for the Group Type
2.4. Enter the name of the group at "Group Name"
2.5. Leave other settings as default
2.6. Click on "No members selected" link
2.7. Search for your Mac devices
2.8. Put a tick to select all Mac devices
2.9. Click on "Select" button at the bottom
2.10. Click on "Create" button to proceed with new group creationNote: You may skip creating a new group if there is an existing group for your Mac devices on Intune portal.
3. Create a new profile to allow WithSecure system extensions and etc
Note: It is recommended to create the configuration profiles within Intune rather than using a separate Preference file (*.plist).In case of WithSecure system extensions:
- Refer to the following documentation for more details on how to create a new profile with system extension settings.In case of Content Filtering:
- Refer to the following documentation for more details on how to create a new profile with content filtering settings.In case of Full Disk Access:
- Refer to the following documentation for more details on how to create a new profile with full-disk access settings.In case of User Notifications:
- Refer to the following documentation for more details on how to create a new profile with notification settings.4. Deploy Elements EPP for Computers (Mac) to your Mac devices
4.1. Go to "Apps"
4.2. Select "macOS" from the list of available platforms
4.3. Click on "Add" button
4.4. Select "Line-of-business app" for App type
4.5. Click on "Select" button at the bottom
4.6. Click on "Select app package file" link
4.7. Click on "Select a field" field
4.8. Search for the installer file (*.pkg) of Elements EPP for Computer (Mac)
Note: There is a need to change the file extension of the installer from *.mpkg to *.pkg so that it would be recognized by Intune.
4.9. Click on "OK" button
4.10. Enter Name, Description and Publisher (use "WithSecure" in this case) for App Information
4.11. Select "macOS Monterey 12.0" for the Minimum operating system
4.12. For the Included apps, maintain just the below bundle IDs and remove the rest of the unnecessary itemscom.withsecure.wsagent 3.0.53367Note: 3.0.53367 indicates a build version, it is recommended to always use the latest build version
4.13. Leave other setting as default and click on "Next" button
4.14. Under Required category, click on "Add group"
4.15. Select your group from the list and click "Select" button
4.16. Click on "Next" button
4.17. Click on "Create" buttonNote: It may take some time before Elements EPP for Computers (Mac) is being deployed to your mac devices silently in the background.